[. . . ] ●“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance. [Airplane Mode]
2
[Playback on TV]
Every time you take a picture, the picture can be automatically sent to a specified location. You can play back the picture on the smartphone/tablet, or save and edit it on PC.
[New Connection]: Configure settings for a new Wi-Fi connection with Wi-Fi compatible devices or WEB services. [. . . ] You can play back the picture on the smartphone/tablet, or save and edit it on PC.
[New Connection]: Configure settings for a new Wi-Fi connection with Wi-Fi compatible devices or WEB services. ([Remote Shooting] / [Playback on TV] / [Send Images While Recording] / [Send Images Stored in the Camera]) [History Connection]: Connect to compatible devices or WEB services using the same setting as before when connecting with Wi-Fi. [Favorite Connection]: You can register frequently used connection settings. [Wi-Fi Setup]: Configure various Wi-Fi settings.
[Send Images While Recording]
You can select and send recorded images.
Electromagnetic waves from the camera can affect instruments and meters. In airplane cabins or in other restricted areas, set [Airplane Mode] to [ON]. Press [MENU/SET] Press to select [Setup] and press [MENU/SET] Press to select [Airplane Mode] and press [MENU/SET] Press to select [ON] and press [MENU/SET]
3 Connect to Wi-Fi
Camera
Smartphone/ tablet
Camera
Wireless access point
Compatible devices, etc. , on network
Camera
Wi-Fi compatible devices
[Remote Shooting] (see below)
[Via Network] (see reverse side)
[Direct] (see reverse side)
[Send Images Stored in the Camera]
Recording/viewing pictures with a smartphone/tablet [Remote Shooting]
This section describes how to make a Wi-Fi connection between this unit and a smartphone/tablet to record pictures using the smartphone/tablet and to transfer pictures to the smartphone/tablet.
2
Easily connect to a smartphone/tablet
When manually connecting without the NFC function
1
Installing “Panasonic Image App”
The “Panasonic Image App” is an application provided by Panasonic that allows your smartphone/tablet to perform the following operations of a Wi-Fi-compatible LUMIX. (“Panasonic Image App” is indicated as “Image App” in the text. ) ■ Version 1. 2 or above
Use the NFC (Near Field Communication) function to easily connect this unit to a smartphone/tablet with Wi-Fi for remote recording and to send pictures to the smartphone/tablet. • This function can be used with NFC compatible devices with Android (2. 3. 3 or above). [Direct]: When you want to directly connect this unit to the device you are using as a wireless access point.
■ Windows
Insert the disc Click [Applications] Click [Recommended Installation] or [LUMIX Map Tool] Continue the installation procedure following the instructions displayed on the screen.
[WPS (PIN code)]
■ Mac
Insert the disc Double-click the recognised disc to open Double-click the [Application] folder to open Double-click the [MAPTOOL] folder to open Double-click [LUMIX Map Tool. pkg] Continue the installation procedure following the instructions displayed on the screen.
5 Press
Enter the SSID and password into the device. The SSID and password are displayed on the connection waiting screen of this unit.
to select a device you want to connect, and then press [MENU/SET]
6 Take or play back pictures on this unit
●DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
[Manual Connection]
When sending images to PC
You can select and send recorded images. Prepare folders for receiving images on the PC before sending a picture to the PC.
Copying detailed maps to a memory card Since the map data size is large, be sure to check the free space on the memory card before copying the data. (A memory card of at least 8 GB is needed to copy the map data for all the regions. ) • When a memory card is formatted (initialised), all data, including the map data, is deleted. Preparation: Insert the supplied disc in your computer drive before starting the copying procedure. Insert the memory card into a card reader/writer (commercially available) Start “LUMIX Map Tool” installed in your computer Windows: Click [Start] → [All Programs] → [Panasonic] → [LUMIX Map Tool] → [LUMIX Map Tool] Mac: Double-click [LUMIX_Map_Tool] in [Applications] (Applications) Select a card from the pull-down menu Click the checkbox to select a region to be copied Click [Execute] Perform the rest of the steps in accordance with the instructions displayed on the computer screen. After copying is finished, click [Close] and remove the memory card from the computer
1
To create a folder that receives images
2
Connecting to your PC
• Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters.
• Turn the computer on. [. . . ] After copying is finished, click [Close] and remove the memory card from the computer
1
To create a folder that receives images
2
Connecting to your PC
• Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. An attempt to create a receive folder may fail if the account includes non-alphanumeric characters.
• Turn the computer on. • If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit.
■When using “PHOTOfunSTUDIO”
1 Press [Wi-Fi] button 2 Press 3 Press 4 Press 5 Press
to select [New Connection] and press [MENU/SET]
• You can also select it by touch operations.
to select the folder you want to send, 7 Press and then press [MENU/SET]
1 Install “PHOTOfunSTUDIO” to the PC
“PHOTOfunSTUDIO”
8 Press
• For details on hardware requirements and installation, read “Operating Instructions for advanced features”.
to select [SINGLE] or [MULTI], and then press [MENU/SET]
2 Create a folder that receives images with
• To create the folder automatically, select [Auto-create]. [. . . ]